• PID controller with 'one shot' auto-tune
  – single loop, heat/cool and ramp/soak as standard
• Quick code, front face or PC configuration
  – easy commissioning and operation using our Windows™-based software
• Selectable control outputs to suit application
  – analog, relay or logic control capabilities as standard
• Case depth behind panel less than 125mm
  – reduced installation and panel costs
• Accurate universal process input with integral transmitter power supply
  – direct connection for any process signal
• NEMA4X/IP66 protection and full noise + EMC immunity
  – reliability in the harshest environments
• RS485/MODBUS™ serial communications
  – SCADA, PLC and open systems Integration

• Single output, Heat/Cool or MotorizedValve control
  - one controller for every PID control Application
• 9 program, 30 segment Ramp/Soak
  - comprehensive set point profiling capabilities
• Analog, relay or logic output as standard
  - extensive control output requirements built-in
• Universal process input with 0.1% accuracy and custom linearizer
  - direct connection of any process signal
• IP66/NEMA 4X protection and full noise immunity
  - reliability in the harshest environment
• RS485 MODBUS serial communications
  - SCADA, PLC and open systems integration

Din Package
PID AUTO Tuning
Low cost
4 digits LED (PV and SV)
Sensor break protection
100 to 240 V AC Power Supply
Various event functions
Standard Specification

• Self-Tuning PID
  Most appropriate PID constant is automatically reckoned up for control objects. PID constant is calculated when making alteration of setting value, or it is corrected when occurring disturbance/hunting etc.
• Blind Function
  At the request, desirable parameter screen is only displayed and set up.
• Simplified Timer
  ON/OFF setting control is available after some certain interval. Function of ON/OFF alarm output is independently usable.
• Priority Display
  Demanding parameter screens are monitored and set up under operational mode screen.(max. 9 screens)
• Multiple Inputs
  Thermocouple/R.T.D.(Pt 100 & JPt 100) are selectable by front key.
• Compact Size
  It is a compact size. The depth is only 77mm!
• Manual Control (Balance less & Bump less)
  Manual output function is applicable for versatile applications of instrumentation systems.
• Digital PV Filter
  For abrupt alteration of input value, filter effect is operational on software.
• PID Over-Shoot Protection
  It is functional to inhibit PID Over-Shoot.
• Heating/Cooling Control
  PID control is available on cooling side.
• Other
  Shift setting of OFF position during ON/OFF control, for both output 1 & 2.

• Patterns × Steps=64 max.
  It is programmable up to “Patterns x Steps=64”.
• Standard Equipment of Time Signal/Alarm Output, RUN Signal Output and DI(RUN Signal Input)
  It is selectable by parameter either time signal output or alarm output, and RUN signal output and DI(RUN signal input) are equipped as standard.
• Auto Tuning PID
  The auto tuning PID is performed three temperature ranges, and calculated optimum PID values.
• Compact Size
  It is easy to install and the depth is only 77mm.
• Power supply for sensors
  Equips the power source for external supply of 12 VDC, which is usable as power source for sensors and such
• Standardization Conformity
  CE, UL, cUL approved and RoSH directive

• Multi – channel board type controller
• Possible to operate 8 points of temperature control in one board
• RS- 232c or RS-485 is equipped for data communication between a host computer
• 8 points of current detector (ct) input & 1 voltage input are equipped as standard
• 11 points of event output (open Collector) is equipped as standard
• Even output can be used as a cooling output (Under particular condition)

Improvement of the controllability with new PID algorithm

• Time until it is stabilized from a control start is shortened
• Loading the jump less control which controls the overshoot after the disturbance
• You can chose from three kind of PID control that can be chosen

Full multiple inputs

• Established the input specification to be one type of the thermocouple (13 types), the platinum resistance temperature sensor (2 types), voltage (5 types) and the electric current (1 type). (Modification of setting with parameter)

Sampling period

• Realized acceleration in 200mS

Utilizes a liquid crystal display

• The indication range has been extended to present 5 columns
• Actualized the various indication with 11 segments
• Adopted LED to back light

PV color auto-change

• Display color of Process value (PV) can be optionally set from Red,Orange and Green as compare with Setting value (SV).

Compact size

• Depth is compact size, TTM-204 is only 55mm, and TTM-205, 207 and 209 are also only 65mm.

• Thermocouple, RTD,Voltage or Current Input.
• On/Off Control Application.
• Two independent Set Points with individual Hysterisis.
• Dust Proof Membrane front.
• Easy to use membrane Key Pad.
• High Accuracy.
• Micro Controller Based.

Universal Process Controller / Temprature Controller ( T.C. )

• Thermocouple, RTD, Voltage or Current Input.
• On/Off Control Application.
• Dual display for process variable and set point
• Two independent Set Points with individual Hysterisis.
• Dust Proof Membrane front.
• Easy to use membrane Key Pad.
• High Accuracy.
• Micro Controller Based.
• Timer function for soak time application.

Universal Process Controller / Temprature Controller ( T.C. )

• Thermocouple, RTD,Voltage or Current Input.
• On/Off ControlApplication.
• Four independent Set Points with individual Hysterisis.
• Dust Proof Membrane front.
• Easy to use membrane Key Pad.
• High Accuracy.
• Micro Controller Based.

Universal Process Controller / Temprature Controller ( T.C. )

• Thermocouple, RTD, Voltage or Current Input.
• On/Off Control Application.
• Four independent Set Points with individual Hysterisis.
• Dust Proof Membrane front.
• Easy to use membrane Key Pad.
• High Accuracy.
• Micro Controller Based.